| • |
Jamb trim shall be supplied at columns and roof line. |
| • |
Base trim is optional. |
| • |
Cap trim is supplied on partial height liner as a standard. |
| • |
Quantities are typically calculated on a “per-bay” basis, so drop pieces
are not required to start the next bay. |
| • |
Partial height liner panel as a standard is provided 8’-0” long. |
| • |
Full height liner panel will be required to be field-cut at the endwall
locations along the slope of the roof. |
| • |
Liner panel can be ordered in lengths other than 8’-0” and full height.
An additional girt run may be required for this condition. |
| • |
Roof liner panel is also offered as an option. |
| • |
Ceiling liner panel has no affect on purlin bracing requirements for
either Classic Roof™ or CFR™ standing seam roof. |
| • |
Ceiling liner will be shipped in maximum 15’-0” lengths for ease of construction.
Longer lengths are available if desired. |
| • |
Full ceiling liner is typically not allowed on projects with roof joists. |
| More specific information is available in our Product & Engineering Manual: |
|
